The Barber Trifecta
Precision matched
components-using proprietary specifications to ensure symmetrical
clipping and reduced intermodulation distortion.
--------------------------------------------------------------------------------
True bypass switching with led indicator- this is achieved by using
an high grade switch, in addendum Solid 20 gauge copper hookup wire
is used between the jacks and switching to create a transparent
bypass.
--------------------------------------------------------------------------------
Full size pots- for durability and for easy serviceability if needed.
--------------------------------------------------------------------------------
Hand made-we make the LTD one at a time and each one is signed and
dated by the craftsman.
--------------------------------------------------------------------------------
Volume knob response circuitry-more shades shades and textures at
your fingertips just by adjusting your volume knob.
--------------------------------------------------------------------------------
Cast aluminum enclosure-our incredibly durable enclosure will last
decades if not centuries!
--------------------------------------------------------------------------------
Double sided pc board with plate through holes-This is the way the
military does it when they want electronics to work FOREVER! all
pedals should be made this way , few are.
--------------------------------------------------------------------------------
Three knob control +2 internal adjustments -The LTD uses a simple
three knob control layout to keep things easy on the performer.
There are two more trim adjusts inside of the LTD so the most
demanding player can match bass and presence to his/her needs.
--------------------------------------------------------------------------------
Ready for 18 volt operation-The LTD operates from 9 volts to 18
volts, this allows use of higher voltage converters and supplies,
for players who want to try higher voltage tweaks.
--------------------------------------------------------------------------------
High quality components- Players have requested the use of carbon
resistors, metalized polyester and silver mica caps. These
components were thought to be only available on the highest priced
pedals. Players asked, and we deliver...no problem, no exaggerated
"boutique builder" pricing.
--------------------------------------------------------------------------------
Center EQ tone control- This Barber tuned vintage style control is
meant to sound balanced at the 12 o clock position, from there going
up adds treble and cuts bass, turning it down adds bottom and cuts
treble. You will find plenty of control from the top of the LTD.
--------------------------------------------------------------------------------
Barber adjustable phono style recovery stage- Most of our op-amp
based overdrive pedals use a cool old style phonograph circuit to
recover the frequencies lost in the overdrive stage, this worked
great for vinyl and now works great for guitar overdrive!
--------------------------------------------------------------------------------
The Story
--------------------------------------------------------------------------------
The LTD was requested over and over again by the legions of low gain
overdrive players that have been forced to try to "shoe horn" higher
gain drives into service by operating them in the lowest part of
their drive range. The LTD has been designed from the ground up for
the low gain player. Now players of many styles including Blues,
country, jazz, funk and beyond have the realistic mild breakup pedal
that requires no excuses.
L.T.D. Manual
The LTD is an extremely clear
low gain overdrive here are some tips on using the LTD.
Controls are Volume, Tone and
drive.
Volume is usually 10 o clock
for a starter, The Tone usually 12 o clock is a good starter and
drive set
from 9 o clock to 12 o clock.
Functions
1. Volume adjusts overall
level of the LTD. This control is very active, settings from very
low to quite
high are all usable depending
on how you have the drive control set.
2. Tone adjusts treble and
bass content. This control is unique from other Barber pedals, it
cuts bass and
adds treble as you turn it up,
and cuts treble while adding bass as it is turned down.
3. Drive adjusts sustain for
the LTD. Low settings can be used to drive amps hard or to adds some
“flavor” to your clean sounds.
High settings can get you to vintage cranked amp sounds.
4. Internal trim pots are (black)
bass, and (white) presence. Start with each control at the half way
point
tune the presence to add
“bite” or clarity. Use the bass trim to add body to your sound. Note
the trim
pots are oriented differently
from each other (turned ¼ of a turn from each other in their
placement on
the PCB). So visually half way
is 3 o clock on the bass trim and 12 o clock for the presence trim.
Do
not use more force than needed
to turn these controls.
Additional notes
